Cantilever gate systems are designed for applications where sliding gates are required but the installation of a ground track is neither possible nor desirable. Most cantilever gate hardware for both enclosed aluminum track gates and steel tubular external roller gates are designed to safely support gates up to 2,000 pounds for continuous duty. Cantilever gate systems are designed for applications where sliding gates are required but the installation. Cantilever gates require no ground track installation, depending solely on overhanging structures based off two side posts. Up-to-date pricing and reviews for cantilever gates on the market can be found at the automatic gate opener reviews website.
Cantilever gates are gate systems that don’t require the need for tracking along the length of the gate opening like sliding gates or overhead support rails. Cantilever Slide Gates are designed to suspend above the ground from two counter-balance posts and not rely on wheels to keep them from dragging on the ground. Cantilever gates are designed to allow the loading of the cantilevered section of the gate to occur evenly between two fixed points: the gate support posts and respective rollers.
Because sliding gate frames aren’t supporting mounting posts, they don’t require the material strength and rigidity needed for cantilever gates. Also available is a cantilever sliding gate system, this is where there is no track and the gate is actually supported by rollers from off the driveway and the gates slides across the driveway, ‘midair’ with no track ! In addition to delivering the heaviest track and gate frame combination in the industry, Tymetal also offers fully automatic cantilever gate systems We provide a variety of options in automatic slide gates and operator systems matched to your specific project requirements.
Cantilever gate systems are specifically designed to meet the rigorous requirements of commercial and industrial applications. Our heavy duty cantilever sliding gate systems do not require a ground track – great where the driveway entrance slopes, for busy or heavy traffic entrances or where minimal disturbance to the surface is requested. Cantilever gates are much longer than a tracked sliding gate as the additional length acts as the counterbalance so that the gate is free to slide back and forth easily and supported throughout the entire opening/closing process.
Cantilever gates do not require the ground surface to have a track in order for the gate to open which is an advantage over some tracked gates where a poorly installed gate could become removed from the track causing a dangerous situation. Cantilever gate systems are often chosen for industrial or commercial installations due to the robustness of the cantilever mechanism which provides a high degree of security although they work just as well on residential gates. Cantilever Gate Chain Link Fence Slide Gate, Welded with Cantilever Rollers, Includes 3 Posts and all the Hardware.
The Ozgate Cantilever Sliding Gate (CSG) series of Cantilevered Sliding Gate systems are purpose designed and built to suit the industrial market place with key considerations and principles in design being: These cantilever gate kits are designed for application with a sliding gate where the situation is as follow; the ground is uneven or the gateway is regularly under heavy machinery that could damage standard track. All ZipTrack Aluminum Cantilever Gates include all the necessary hardware for a complete and professional installation.
We also offer ZipTrack Aluminum Cantilever Gates in frame only, which will allow you to add your own wood, chain link or other filler material for maximum security. Trackless cantilever gates especially for commercial properties for high security and designed for any uneven driveways. Cantilever sliding gate systems do not require a ground track – this can be advantageous where the driveway entrance slopes, busy or heavy traffic entrances or where minimal disturbance to the driveway surface is requested.
Cantilever gate frames can be designed to be used with any type of fence including PVC, Chainlink, Wood, Ornamental, Azek, or Custom Aluminum. The fortress slide cantilever gates are fabricated from aluminum alloy or steel making it the perfect choice where security and durable is of upmost importance. Cantilever gates are gate systems that don’t need for tracking along the length of the gate opening like sliding gates or overhead support rails.
Gate designers should be aware that most heavy-duty gate hardware designed to support gates in excess of 2,000 pounds uses either a ground mounted truck assembly or an overhead trolley system. The extruded aluminum track with custom fabricated trucks Cantilever system and the cantilever steel or aluminum monorail systems make Ametco’s Cantilever Gates perform smoothly even on the largest gates. The back-frame on these gates is 30% to 40% of the opening width so they require more side room than a ground track installation.
Sliding gates, however, may require concrete footings or ground track installation in the existing driveway. The term, cantilever slide gate, may refer to any number of gates, from ornamental picket styles to functional chain link styles, from those that require cantilever rollers to those requiring gate tracks and trolleys. Frontier Pitts is the only approved supplier of bi-folding gates for National Grid and has designed, manufactured and installed automatic security sliding, hinged and bi-folding gates to many sites nationwide.
The operation of Cantilever Gates is based on a gate panel that slides through the gate opening in a linear motion fully supported above ground and between two counter balance posts each with a top and bottom roller assembly. Atlantic Fence also offers steel cantilever slide gates as well as Aluminum. Atlantic Fence’s cantilever slide gate systems are engineered and developed to meet the demanding requirements that commercial and industrial applications require.
The design of Cantilever Gates is based on a gate panel that slides through the gate opening in a linear motion fully supported above ground. The back-frame on these gates is 60% to 70% of the opening width so they require more side room than a ground track installation. The Amazing Gates of Canada wrought iron Cantilever driveway gate system has been designed with safety and easy installation in mind.
When you purchase commercial grade sliding gates from us, you gain the support of a dedicated partner with the experience to deliver a system designed to meet the specific requirements of today’s most demanding customers. Our box frame construction cantilever gate design features steel cabling and more aluminum support materials than any other product on the market today. Hoover Fence offers aluminum slide gates built to close 30′ wide gate openings made with a single gate track.
The other example photos of Cantilever gates are lighter weight aluminum designs appropriate for smaller openings for driveway entrance security for cars and people, areas where a simple barrier gate is not sufficient. Advantages over the traditional sliding floor tracks is that cantilever gates are suitable for uneven ground, not as easily affected by debris and are quieter and smoother to run. We have over 30 years experience of providing all types of industrial doors, gates and access systems, so why not take a look at our (satisfied) client list then get in touch to discuss your heavy duty cantilever gate needs.
A sliding cantilever design will also allow you to open your gates with no lateral space required. Using a trackless system, a cantilever gate application is suitable where space is not an issue and sliding gates are required or requested. Cantilever gate systems for sliding metal gates and suitable for both commercial and industrial applications.
This cantilever gate hardware model is recommended for large and heavy industrial or commercial sliding gates, especially in high traffic applications. By welding or mechanically fastening the gate to the bottom track, DuraGates sliding gate system can be used with any gate material such as steel, wood, vinyl, aluminum, chain link, etc. Uneven Ground Surface or Sloping – The ground surface the cantilever sliding gates operate over does not need to be exactly level because the gates never actually touch it. So if both types of sliding gates are being considered, it’s worth weighing up the additional cost that preparing the ground to take a track would be, versus limited ground preparation for the cantilever gates option.
Cantilever sliding gates offer more advantages then sliding track over the driveway, first thing you notice there no track over the driveway, Our products range from 8 wheel roller carriages that will span 15 metres with the capacity of up to 1200 kgs, ideal for light industry and residential uses and can have all the styles and types of gate designs. These gates can span large widths, be installed on uneven ground, over block paving and grass, and the no-track installation makes it easier for busy entrances. ZipTrack Aluminum Cantilever Gates made for chain link filler wire can be shipped with the wire in place or wire can be easily installed on the job site.
Our exclusive ZipTrack Cantilever Gates are offered in a variety of styles and colors to match and complement your Ornamental Aluminum Fence. ZipTrack Aluminum Cantilever Gates are manufactured exclusively by Elite Fence Products Inc. The many benefits of cantilever gates make them suited for high traffic industrial and commercial properties or any location where a ground track is not an option.
Instead of being installed with a track, the cantilever system consists of rollers which slide on a tubular track that is fitted to the bottom of the gate. Like all our gates, shutters and doors, our cantilever gates are designed with security in mind. It is always the size of the opening of gate; whereas a Cantilever slide gate ( Figure 2) is 50% longer than the opening so it is held above ground (about 6″), as it slides and in closed position the extra length (counter balance) is held between the cantilever rollers which are mounted on the posts, 2 above and 2 below.
Cantilever gates are found to be quieter than floor track systems because of the absence of wheels on the ground. There will be no chance of operation error due to ground obstruction or weather causes because cantilever gates do not require ground tracks. A cantilever gate design is supported from one end as it opens and closes, because of this the need for a track requirement is eliminated across the gate opening and can span widths of up to 10m.
Accessories for sliding gates, swing gate and cantilever system stainless steel. If you have a very large opening or a very heavy gate by design, you may want to consider an aluminum design as it may require a smaller gate operator or place less stress on the gate operator With openings under 27′ and typical chain link infill, a steel cantilever gate is an excellent and economical choice. Aluminum cantilever gates are an excellent choice with larger openings as the overall width of the upper and lower horizontal members may be easily extended without interfering with the track design.
With the enclosed track system and square profiles, aluminum track cantilever gates are the best choice for ornamental and decorative gate designs. The selection of hardware is more specific if the gate is an enclosed aluminum track gate or a steel tubular gate with external rollers. Double track cantilever slide gates incorporate a double track into the aluminum structure of the gate.
Single track aluminum cantilever slide gates incorporate a single track into aluminum structure of the gate, and are the most economical cantilever option. If you are building a heavier custom steel gate you will want to look at the Communelo Cantilever Gate Hardware distributed through Architectural Iron Design under the brand name Duragates. 8 page PDF: Brochure features Swing, Cantilever, V-Wheel Roller security gates in aluminum, galvanized steel and stainless steel.
Cantilever gate systems are ideal for spanning large openings and function much like a typical sliding gate, but without the need for ground mounted track and wheels. The smaller frames of sliding gates make materials easier to lift, while the weight of cantilever gates requires a crane. We use mostly 4″ OD steel posts for our aluminum slide gates.
Generally steel chain link cantilever slide gates require 3″D. Hoover Fence offers aluminum slide gates built to close 30′ wide gate openings made with a single gate track. Aluminum Cantilever Gates – Internal Track Aluminum Slide Gates are often made entirely of aluminum.
Cantilever slide gates are built larger than the gate opening they are designed to close, often as much as 50% larger than their respective openings. Cantilever slide gates are unique from other types of slide gates in their construction, hardware choices, and design. Sapphire manual sliding gates use a trackless cantilever system and are commonly used when other gate installations are not possible.
They are typically constructed to be wider than slide gates because they require a section along the fence structure for the gate to be supported. Cantilever Slide Gates are the ideal for applications requiring automatic gate operator systems since no part of the gate comes in contact with the ground. Phoenix Fence manufactures, distributes and professionally installs Commercial and Industrial Grade Chain Link Slide Cantilever Gates in various styles, heights and specifications.
Sliding cantilever gates are suspended over the gate opening by a set of 4 high quality sealed bearing cantilever rollers mounted to two 4″ round posts. Track gates are normally always cheaper (half cost) they are therefore normally used, however if the driveway is not flat and level or where security is an important consideration, then cantilever sliding gates would be the better way to go. The installation of cantilever sliding gate footings can be done without disruption to the driveway, whereas this is not the case if concrete footings have to be done for track gates.
Being smaller frames the sliding gates are also easier to install, most cantilever sliding gates need a crane truck for installation. We can supply electric sliding gate openers (motors) and supporting hardware and accessories to suit any application, from residential to Industrial. We’re a recognized industry pioneer in producing cantilever slide gates and matched access control systems.
We design and manufacture the most extensive line of perimeter security gates and electric gate operator systems for the commercial/industrial and correctional markets. Industrial Cantilever Gates from Ultra Aluminum are engineered for both security and architectural appeal for openings from 6′ to 50′ wide. We offer double track aluminum slide gates for gate openings up to 40′ wide, 80′ wide doubles. Be sure to visit automatic gate opener reviews for the best cantilever gates on the market to buy.
Accuracy in construction and installation is paramount for the operation and long term durability of cantilever style trackless gates. The Wikipedia definition of cantilever is: A cantilever is a rigid structural element, such as a beam or a plate, anchored at only one end to a (usually vertical) support from which it is protruding……..When subjected to a structural load, the cantilever carries the load to the support where it is forced against by a moment and shear stress.” Simply put a cantilever gate system is where your gate is fixed only on one side and the gate slides back and forth by means of two carriage units, with wheels and a runner track.